MINERAL WOOL THERMAL BOARD
Mineral wool thermal boards are semi-rigid, dimensionally stable slabs made from entangled mineral fibre, used as the insulation layer in wall cavities, roof decks, interior partitions and industrial cladding. ISOKING supplies them as mineral wool thermal slabs in 1200 × 600 mm modules, 30 to 100 mm thick and 40 to 120 kg/m³, with plain, aluminium foil-faced and wire-mesh reinforced versions so one board family fits different wall and roof build-ups.
0.036–0.042
W/(m·K) thermal conductivity
Why specifiers choose these thermal boards
A1 non-combustible core
The entangled mineral fibre core reaches A1 reaction to fire, adds no fuel load to the assembly and produces no burning droplets, so the build-up keeps the fire performance it was specified for.
Thermal resistance that holds
Conductivity stays between 0.036 and 0.042 W/(m·K) across the service range, so the U-value calculated at design stage remains the U-value performing on site over the building life.
Easy to cut and fit
Square-cut edges and a rigid body let the board be cut to size and friction-fitted between studs and rails, holding its shape on vertical walls without sagging or crumbling at the fixing line.
Technical specification
Material
Mineral wool (basalt fibre)
Thickness
30, 40, 50, 60, 75 and 100 mm
Board size
1200 × 600 mm, cut-to-size on request
Thermal conductivity
0.036–0.042 W/(m·K)
Reaction to fire
A1, non-combustible
Maximum service temperature
up to 750 °C
Facing options
plain, aluminium foil, wire-mesh reinforced
Water repellency
hydrophobic treatment available
Layered edge view showing the dense, stratified fibre structure that keeps the board rigid and dimensionally stable.
Where the boards are used
Wall cavities and facades
Full-fill or partial-fill insulation behind brick, block and rainscreen cladding, friction-fitted between studs at 600 mm centres.
Roof decks and metal roofing
Boards act as the thermal break under waterproof membranes and inside standing-seam and built-up roof systems.
Partitions and ceilings
Higher-density boards control airborne sound in party walls, ceilings and plant rooms where reverberation and flanking noise matter.
Industrial cladding and screens
Insulation on steel structures, machinery enclosures and equipment screens in workshops and process areas.
Flat mineral wool thermal boards stacked in the production area before packing, ready for project delivery.
Packing, loading and OEM
Boards are compressed into shrink-wrapped bales or cartons on pallets. Container capacity depends on density and thickness, and we issue a loading plan with each order so your forwarder can check the shipment before it leaves. Custom densities, cut-to-size formats, private labels and printed cartons are produced on the same line, so one container can mix several SKUs.
Quick answers for specifiers
What is a mineral wool thermal board?
It is a semi-rigid slab made from basalt fibre that combines thermal insulation, acoustic control and fire resistance for buildings and industrial equipment.
Is the board non-combustible?
Yes. The mineral fibre core is rated A1 non-combustible: it does not burn, spread flame or produce burning droplets where fire performance is specified.
Which density and thickness should I choose?
The choice follows your target U-value, cavity depth and acoustic requirement. Send the build-up drawing and we will match the board density and thickness to it.
Can boards be cut to project size?
Yes. Standard size is 1200 × 600 mm, and custom dimensions can be cut on request, with plain, foil-faced or wire-mesh reinforced facing.
Do you export and supply project documentation?
We supply factory-direct worldwide, palletized for sea freight. Reaction-to-fire and thermal conductivity reports are issued with the shipment, and project-specific documentation packages can be prepared for consultants.
Request a quote for your insulation build-up
Tell us the substrate, target U-value, thickness and density you need, and we will come back with the board format, facing option, packing plan and delivery schedule.
Reply within one working day · OEM labelling available