IKING GROUP-INSULATION AND ACOUSTIC SOLUTION FOCUS

Home Products Mineral Wool Board Mineral Wool Board Cut to Size for Custom Insulation Projects

Products

Mineral Wool Board Cut to Size for Custom Insulation Projects
Mineral Wool Board Cut to Size for Custom Insulation Projects Mineral Wool Board Cut to Size for Custom Insulation Projects Mineral Wool Board Cut to Size for Custom Insulation Projects Mineral Wool Board Cut to Size for Custom Insulation Projects Mineral Wool Board Cut to Size for Custom Insulation Projects

Mineral Wool Board Cut to Size for Custom Insulation Projects

Product ID : IK-MW2330
Product Attributes :

Made-to-order mineral wool boards sawn to project dimensions and density, supplied as custom mineral wool insulation panels for contractors and insulation installers on projects worldwide.

Product Description
CUT-TO-SIZE MINERAL WOOL BOARD
ISOKING cut-to-size mineral wool boards are semi-rigid panels sawn to the thickness, density and dimensions a project actually calls for, rather than forcing standard modules into awkward bays. Each custom mineral wool insulation panel is produced from entangled mineral fibre, rated A1 non-combustible, and supplied in 1200 x 600 mm standard modules or cut to special sizes for wall, roof and partition build-ups.
40-120
kg/m3 density
Any size
sawn to order
A1
non-combustible
1200x600
standard module
Why contractors order boards cut to size
Made-to-order dimensions
Panels are sawn to the exact length, width and thickness on the drawing, reducing on-site trimming, off-cuts and waste in tight wall bays and roof slopes.
Density matched to the build-up
Higher densities are supplied for loaded or exposed areas, softer grades for friction-fit cavities, so the panel matches the structural and acoustic requirement rather than a generic stock grade.
Square, stable edges
The rigid fibre body keeps clean square edges after cutting, so panels seat flush between studs, rails and joists without crumbling or losing shape along the fixing line.
Technical specification
Property
Value
Material
Mineral wool fibre
Density
40-120 kg/m3
Thickness
25-120 mm, cut to order
Board size
1200 x 600 mm standard; special sizes sawn on request
Thermal conductivity
0.036-0.042 W/(m·K)
Reaction to fire
A1, non-combustible
Maximum service temperature
up to 750 °C
Facing options
plain, aluminium foil, wire-mesh reinforced
Water repellency
hydrophobic treatment available
Assorted thicknesses of semi-rigid mineral wool boards arranged around a grooved centre sample, illustrating cut-to-size mineral wool panels ordered for custom wall and roof insulation projects
A range of board thicknesses and formats shows how panels are matched to different cavity depths and project sizes.
Where these boards are used
Odd-sized wall bays
Panels cut to fit non-standard stud spacing, gable ends and recessed areas where stock modules leave gaps.
Roof slopes and penetrations
Shaped and trimmed boards follow rafter pitches, dormers and service penetrations under the waterproof layer.
Partition retrofits
Custom widths fill existing party walls and refurbishment cavities without over-drilling or damaging finishes.
Equipment enclosures
Made-to-measure panels wrap machinery housings and custom duct and pipework screens in workshops and plant rooms.
Stacks of flat mineral wool boards prepared in the production area for cut-to-size project orders before packing and export shipment
Boards staged in the production line before being sawn to project dimensions and packed for delivery.
Packing, loading and OEM
Custom orders are compressed into shrink-wrapped bales or cartons on pallets, with mixed sizes allowed within one container. We issue a loading plan for each order so the forwarder can verify the shipment before it leaves the factory. Special densities, non-standard formats, private labels and printed cartons are produced on the same line.
Quick answers for specifiers
Why order mineral wool boards cut to size instead of standard sheets?
Cut-to-size panels match the drawing exactly, which lowers on-site cutting and off-cut waste, speeds installation and helps the finished build-up meet the specified U-value and fire rating.
Can you produce a panel from our drawing?
Yes. Send the build-up drawing, required dimensions, density, thickness and facing, and we will confirm the feasible format and quotation before production.
Are custom-sized panels still fire-rated?
Yes. The mineral fibre core remains A1 non-combustible regardless of cut size; cutting changes dimensions only, not the fire reaction of the material.
What lead time applies to custom sizes?
Standard modules ship from stock; special sizes and densities follow the production schedule, which we confirm with the order and align to your delivery date.
Do you supply project documentation with custom orders?
We supply factory-direct worldwide, palletized for sea freight, with reaction-to-fire and conductivity reports issued with the shipment and consultant-ready documentation packages on request.
Request a cut-to-size board quotation
Send us the substrate, cavity depth, target U-value, required dimensions and density, and we will return the panel format, facing option, packing plan and delivery schedule.
Reply within one working day · OEM labelling available
Online Inquiry