MINERAL WOOL LAMELLA BOARD
Mineral wool lamella boards are panels in which the mineral fibres are oriented upright rather than laid flat, producing a vertical fibre mineral wool panel with stronger compression resistance and better resistance to water movement in cavity backing. Supplied A1 non-combustible, they are designed as the insulation and fire-stop layer behind curtain walls, stone and metal rainscreen cladding.
Vertical
fibre orientation
High
compressive strength
Rain-shedding
cavity backing
Where the vertical fibre structure helps
Upright fibre orientation
Fibres run through the thickness of the panel, giving the lamella board greater rigidity and load-spreading capacity than a flat-laid board under cladding fixings and wind pressure.
Compression-resistant backing
The panel holds its thickness under gasket, rail and anchor loads, maintaining the insulation cavity and preventing settlement that would open gaps behind the facade.
Water-repellent core
Hydrophobic treatment and the upright fibre structure support drainage and drying in the cavity, reducing the risk of moisture being held against the inner leaf.
Technical specification
Material
Mineral wool fibre, vertical lamella orientation
Thickness
40, 50, 60, 80 and 100 mm
Board size
1200 x 600 mm, cut to size on request
Thermal conductivity
0.037-0.043 W/(m·K)
Reaction to fire
A1, non-combustible
Maximum service temperature
up to 750 °C
Facing options
plain, black tissue, aluminium foil
Water repellency
hydrophobic standard treatment
Edge-on view showing the upright, dense fibre structure of the lamella panel behind facade cladding.
Where these boards are used
Curtain wall cavities
Panels back glass and aluminium curtain wall sections, insulating the cavity while providing fire resistance behind the glazing line.
Rainscreen cladding backing
Boards sit behind metal, fibre cement or stone rainscreens, supporting the pressure-equalised cavity and drainage detail.
External wall insulation
Lamella grades back ventilated and non-ventilated facade systems where compressive strength and dimensional stability matter.
Stone and metal facade gaps
Custom-cut panels fill irregular reveals, soffits and gaps around facade panels and fixing rails.
Lamella boards staged for loading, supplied to facade contractors for curtain wall and rainscreen projects.
Packing, loading and OEM
Panels are wrapped and palletized to protect the rigid edges for export. Mixed thicknesses and cut sizes can be consolidated per container, with a loading plan issued for each order. Foil, tissue and plain facings, plus project-labelled cartons, are available on the same production line.
Quick answers for specifiers
What is a lamella mineral wool board?
A lamella board is a mineral wool panel with fibres oriented vertically through its thickness, rather than horizontally, which raises compressive strength and rigidity for facade backing use.
How does the vertical fibre arrangement help?
Upright fibres carry loads across the panel thickness, resist compression from fixings and gaskets, and help the panel retain its shape and cavity thickness behind the cladding over time.
Where are lamella boards typically installed?
They are used behind curtain walls, rainscreen cladding, external facade systems and in soffits and reveals where a strong, stable cavity backing is required.
Are the panels water-repellent?
Yes. Lamella grades carry a hydrophobic treatment as standard, and the cavity detail should still allow drainage and ventilation as designed.
Which reports support facade specification?
Reaction-to-fire and thermal conductivity reports are supplied with the shipment, and additional project documentation can be prepared for architects, specifiers and facade consultants.
Request a lamella board facade quotation
Share the facade build-up, cavity width, wind and fixing loads, and target U-value, and we will advise the lamella grade, thickness, facing and packing plan.
Reply within one working day · OEM labelling available