IKING GROUP-INSULATION AND ACOUSTIC SOLUTION FOCUS
Factory-direct Preformed Mineral Wool Pipe Elbows (90° & 45°), precision CNC-cut from high-density basalt mineral wool (100–150 kg/m³). Engineered for industrial steam lines, petrochemical refineries, and HVAC systems with Euroclass A1 fire safety (up to 650°C–750°C) and an optional aluminum foil vapor barrier.
IKING GROUP manufactures precision CNC-cut and molded Preformed Mineral Wool Pipe Elbows (Stone Wool Pipe Bends) engineered to eliminate thermal bridges at 90-degree and 45-degree pipeline turns. Produced from high-density basalt mineral wool (100–150 kg/m³), these preformed fittings deliver Euroclass A1 non-combustible fire resistance up to 650°C–750°C for industrial steam lines, petrochemical refineries, and commercial HVAC networks.
Precision CNC-machined into exact 90° and 45° angles to match standard DN15–DN600 pipe elbows without seams, gaps, or on-site miter cutting waste.
Certified EN 13501-1 Euroclass A1 fireproof performance, maintaining dimensional stability under continuous service temperatures up to 650°C.
Water repellency ≥98% with low leachable chloride content (≤10 ppm) to prevent corrosion under insulation (CUI) on stainless steel piping.
Available unfaced (plain) for high-heat industrial lines or reinforced with FSK Aluminum Foil facing for chilled water HVAC condensation control.
| Technical Parameter | Standard Specification / Test Value |
|---|---|
| Base Material | High-Purity Basalt Mineral Wool / Stone Wool Fiber |
| Standard Bend Angles | 90 Degree, 45 Degree, 180 Degree Return Bend (Long Radius 1.5D & Short Radius 1.0D) |
| Apparent Density | 100 kg/m³ – 150 kg/m³ (Custom densities up to 180 kg/m³) |
| Thermal Conductivity | ≤ 0.036 – 0.044 W/(m·K) at 25°C (ASTM C335) |
| Service Temperature | -120°C to +650°C (Max peak working temperature up to 750°C) |
| Pipe Inner Diameter (ID) | 22 mm – 610 mm (DN15 to DN600) |
| Insulation Wall Thickness | 30 mm, 40 mm, 50 mm, 60 mm, 80 mm, 100 mm |
| Surface Facing Options | Plain (Unfaced) / Reinforced Aluminum Foil (FSK) with Self-Sealing Lap |
| Fire Rating & Certifications | Class A1 Non-Combustible (EN 13501-1), CE, ISO 9001, ISO 14001, ASTM C547 |
High-pressure steam pipelines, turbine exhaust bends, and boiler feedwater loops.
Process piping elbows requiring Class A1 fire protection and acoustic noise reduction.
Chilled water and hot water distribution bends in commercial complexes and data centers.
Engine room exhaust bends and fire-rated bulkhead pipe penetrations.
Choose Aluminum Foil Faced (FSK) elbows for HVAC chilled water pipes or humid environments where a vapor barrier is required to prevent condensation. Choose Unfaced (Plain) elbows for high-temperature industrial steam lines (above 250°C) that will later be clad with aluminum or stainless steel jacketing.
Yes. As a direct source manufacturer, we supply complete piping insulation packages—including straight pipe sections, 90°/45° elbows, and pipe tees—consolidated into a single 40HQ container to optimize sea freight and ensure uniform density across your project.
Please provide the steel/copper pipe outer diameter (OD), desired insulation wall thickness (mm), bend angle (90° or 45°), bend radius (Long Radius 1.5D or Short Radius 1.0D), and facing requirement.
Standard MOQ: 1×40HQ Full Container Load (Mixed sizes of straight pipes, elbows, and tees supported). Contact our engineering sales team below for technical datasheets (TDS), certifications, and FOB/CIF container quotations.