IKING GROUP-INSULATION AND ACOUSTIC SOLUTION FOCUS
Insulation jacketing cover is used to protect the inner insulation materials from rain, water, wind, sunlight, etc, also called weatherproofing finishing.
High-performance weatherproofing jacketing cover engineered to protect inner mineral wool and mineral wool thermal insulation from moisture ingress, UV radiation, and mechanical damage.
Our Insulation Jacketing Cover (weatherproofing finishing) serves as the primary external barrier for industrial mineral wool, mineral wool, and ceramic fiber insulation systems. By completely sealing the core insulation against heavy rain, atmospheric moisture, chemical exposure, and UV degradation, it prevents moisture absorption, maintains system thermal efficiency, and significantly reduces the risk of Corrosion Under Insulation (CUI).
Prevents water infiltration into inner mineral wool materials, maintaining low thermal conductivity and optimal energy savings over the system's life cycle.
Seals joints and critical piping components to block trapped moisture, extending pipe and vessel operational lifespan.
High tensile strength and impact resistance withstand heavy wind loads, sandstorms, UV degradation, and marine/corrosive industrial environments.
Standardized pre-formed components (elbows, tees, flanges, valve covers) ensure precise fitment and reduce field installation time.
Aluminum (smooth, stucco embossed, corrugated), Stainless Steel (304/316), and Galvanized Steel.
UV-resistant composite cladding and specialized weatherproofing finishes for high-corrosion zones.
Straight pipe jacketing, 45°/90° pre-formed elbows, equal/reducing tees, vessel head covers, and quick-release removable valve covers.
High-pressure steam lines, boiler casing, turbines, and exhaust ducting.
Refineries, offshore platforms, LNG storage, and cross-country transport pipelines.
Incinerators, chemical processing units, heat exchangers, and bulk storage tanks.
A: Mineral wool loses its thermal resistance when exposed to moisture and rain. Jacketing provides an impermeable external barrier against water, UV degradation, and mechanical impacts, preventing moisture ingress, preserving insulation efficiency, and eliminating Corrosion Under Insulation (CUI).
A: We supply Aluminum (Smooth, Stucco Embossed, Corrugated), Stainless Steel (304 / 316 grade for high-corrosion or marine environments), and Galvanized Steel, available in custom thicknesses and roll sizes according to ASTM / ISO standards.
A: Yes. We offer precision-engineered 45°/90° pre-formed elbows, equal/reducing tees, end caps, and quick-release removable valve jackets. Prefabricated components minimize field labor hours and ensure precise fitment on job sites.
A: Absolutely. We work with EPC contractors and engineering teams to produce custom-dimensioned jacketing, vessel heads, and equipment cladding based on your technical drawings and specification sheets.
A: Products are packed in reinforced export-standard wooden crates or heavy-duty pallets with moisture-proof wrapping to prevent deformation, scratching, or corrosion during ocean transit.
Specify your project requirements (pipe sizes, metal type, thickness, or mineral wool thickness), and our technical sales department will deliver a complete Bill of Materials (BOM) proposal within 24 hours.
CHINA IKING INDUSTRIAL GROUP CO., LTD
E-mail: zoebai@ikinggroup.com
Tel: +86-22-60767280
Cel Phone: +8618020008725(Wechat, WhatsApp)
Office Add: 14 floor, Zhiyun Building No.2, Linke Middle Road, Hedong District, Tianjin City, China
Office Add2: Room 2003, No. 2 Haibin 6th Road, Tianjin Pilot Free Trade Zone (Tianjin Port Bonded Zone), China
